• Roadmaster 154 Universal Wiring Kit
Roadmaster 154 Universal Wiring Kit

Roadmaster 154 Universal Wiring Kit

SKU:HA5HNYKEW
Sale price
SG$ 188.00
Regular price
SG$ 312.00
Unit price
per 
( 39% off )
Quantity:
Expected Delivery: 21-28 days

Tracked Shipping

Secure Payments

10 Days Return

Tracked Shipping

Secure Payments

10 Days Return

  • Most widely-used wiring method
  • Includes four diodes, all installation hardware and step-by-step instructions

Customer Reviews

Arrived promptly and installed relatively easy. When installed on a 2014 RAM Arrived promptly and installed relatively easy. When installed on a 2014 RAM, I found the wire connectors to be too large as the factory wires were very small due to the LED lights. Took several times to secure wires. 5excellent kit - needed about 3 more fee of wire but not a big issueInstalled easily (Honda CRV trim is pretty easy to remove to run the wires). I ran the wires through the firewall with the supplemental braking kit wires and hose by drilling a hole dead-center in the space reserved by Honda for mounting a Clutch - just remove the pre-scored matting and use a hole saw. I put in a grommet to protect the wires/hoses and also inserted a wire loom (split) into the hole for good measure and to clean up the installation. Removal of the tail lights is simple. I only had to splice in a few feet of wire under the tail-gate trim plate, as I ran short of cable to wire up the right side lights on one of the wires. I decided to order two additional diodes to allow the turn-signals to operate independently. At some point I'll put one into the Third brake light in the tail gate, but that's for another day. I chose this method but if on a budget and you have a CRV - at the bottom of the tail light assemblies is a spare/blank light fitting in which you could just run a separate brake/turn signal kit, which avoids the use of diodes and less expensive.4Connections susceptible to water and dirt.Connections susceptible to water and dirt. I've had multiple connection failures. Looks like the metal is oxidizing. Easy fix with sand paper and water repellent spray.4It works fine.It works fine. lets me use the regular car lights to drive and also when towed.5Highly recommend this product, does require a little skill to install.I was getting tired of having to carry around a spare set of tow lights and had read good about this product.Aside from getting out your lights and determining the correct wire, the install is relatively painless and once you are done, it works very, very well. Do make sure you have a comfort with cutting and splicing wires and a knowledge of how to best wrap everything to protect it and you will be fine.5May be cheaper / easier to have it done by an RV dealer after all.Works well, but... Installation is a royal pain.Before you buy this check your vehicle and plan very carefully. If I had known what was involved, I'd have paid extra to buy it from an RV place and have it installed.1) Both my motor home and 'towed' have separate turn signal and brake lights, so I needed this plus and additional 2 diodes (Separate purchase). Come to find out, the round 7-wire on the back of the motor home was wired to combine turn signals and brake lights. Check that with a voltmeter first!2) Examine your towed to determine exactly how you'll run the wires. I was not comfortable running them underneath, so wanted to go through the firewall and back through the passenger compartment. The firewall was all but inaccessible, and I ended up tearing a couple existing wires rendering the towed inoperable. Had to have it towed to a dealer where it was costly to fix what I'd done and then have them run the wires through the firewall for me.4Works as advertised. A quick install AFTER you run the wire front to back. That is the time consuming part.The instructions leave something to new desired. Look at the YouTube video. It's very detailed. 5worked good.Easy to install and run the wires. Could be about 3 feet longer for the Jeep. I used the smaller wire bundle and hooked the two together and then had plenty of wire. Road master told me they were backed ordered and it would be 2 weeks to get it. Got it in 2 days on amazon. Roadmaster has a link that shows you a video on how to install it and the car wire codes..5Wiring Kit For TowablesThis was a very easy to use wiring kit that gave great instructions. Wiring cars for towing is a time consuming job but this kit makes it as easy as possible. Worked well.5Good kit for my f150This is the second time I've bought this kit. Bought a new truck so needed to wire it up. Both times installing went well. Good quality and instructions.5Did not come with diodes instead shipped with light bulbs ... Did not come with diodes instead shipped with light bulbs that you have to drill into tail lights to make work which wouldn't even fit! Returned! 1Wiring a BreezeThis product was easy to install, instructions simple to follow and works very well. Recommend this product to hook up lights to your dingy.5Good System that Simplifies the Light Hook-up on Tow VehicleVery good system that installed easily in my 2017 F150 making it much easier than adding extra lights to the back of the truck when towing. I also think this is a better system than adding the light socket that you must drill a hole into your back light housing. I have heard if not resealed correctly might cause fogging of the lens and moister issues in the housing.5
See All Reviews
Shipment tracking ID will be provided after your product(s) is dispatched. The delivery date stated is indicative and subject to availability, payment authorization, verification, and processing. In case your product(s) is not delivered due to an incorrect or invalid address, we will not be able to process any claims. However, we will notify you if it is returned to us.
  • Return or exchange requests can be made within 10 days of the delivery date.
  • To return or exchange any items, please email us at info@directnine.sg, clearly mentioning your order number and our customer support team will guide you on the process.
  • To be eligible for return, products must be in the exact condition you received them in. All packaging material must be undamaged and unused with the price tags intact.
  • Orders can be cancelled before dispatch. If the order has already been dispatched, cancellation fees might be charged.
  • Due to the nature of the products that we sell, we will not be able to replace or refund unwanted items if they have been opened or any seals are broken.
  • The refund will not include the import duties or the cost of delivery or return postage.
  • If your refund is approved, then it will automatically be credited to the original method of payment, within 7-10 days.
  • DirectNine reserves the right to alter and enforce this Return and Refund Policy at any time without having to serve a prior notice to users.
Description
  • Most widely-used wiring method
  • Includes four diodes, all installation hardware and step-by-step instructions
Reviews

Customer Reviews

Arrived promptly and installed relatively easy. When installed on a 2014 RAM Arrived promptly and installed relatively easy. When installed on a 2014 RAM, I found the wire connectors to be too large as the factory wires were very small due to the LED lights. Took several times to secure wires. 5excellent kit - needed about 3 more fee of wire but not a big issueInstalled easily (Honda CRV trim is pretty easy to remove to run the wires). I ran the wires through the firewall with the supplemental braking kit wires and hose by drilling a hole dead-center in the space reserved by Honda for mounting a Clutch - just remove the pre-scored matting and use a hole saw. I put in a grommet to protect the wires/hoses and also inserted a wire loom (split) into the hole for good measure and to clean up the installation. Removal of the tail lights is simple. I only had to splice in a few feet of wire under the tail-gate trim plate, as I ran short of cable to wire up the right side lights on one of the wires. I decided to order two additional diodes to allow the turn-signals to operate independently. At some point I'll put one into the Third brake light in the tail gate, but that's for another day. I chose this method but if on a budget and you have a CRV - at the bottom of the tail light assemblies is a spare/blank light fitting in which you could just run a separate brake/turn signal kit, which avoids the use of diodes and less expensive.4Connections susceptible to water and dirt.Connections susceptible to water and dirt. I've had multiple connection failures. Looks like the metal is oxidizing. Easy fix with sand paper and water repellent spray.4It works fine.It works fine. lets me use the regular car lights to drive and also when towed.5Highly recommend this product, does require a little skill to install.I was getting tired of having to carry around a spare set of tow lights and had read good about this product.Aside from getting out your lights and determining the correct wire, the install is relatively painless and once you are done, it works very, very well. Do make sure you have a comfort with cutting and splicing wires and a knowledge of how to best wrap everything to protect it and you will be fine.5May be cheaper / easier to have it done by an RV dealer after all.Works well, but... Installation is a royal pain.Before you buy this check your vehicle and plan very carefully. If I had known what was involved, I'd have paid extra to buy it from an RV place and have it installed.1) Both my motor home and 'towed' have separate turn signal and brake lights, so I needed this plus and additional 2 diodes (Separate purchase). Come to find out, the round 7-wire on the back of the motor home was wired to combine turn signals and brake lights. Check that with a voltmeter first!2) Examine your towed to determine exactly how you'll run the wires. I was not comfortable running them underneath, so wanted to go through the firewall and back through the passenger compartment. The firewall was all but inaccessible, and I ended up tearing a couple existing wires rendering the towed inoperable. Had to have it towed to a dealer where it was costly to fix what I'd done and then have them run the wires through the firewall for me.4Works as advertised. A quick install AFTER you run the wire front to back. That is the time consuming part.The instructions leave something to new desired. Look at the YouTube video. It's very detailed. 5worked good.Easy to install and run the wires. Could be about 3 feet longer for the Jeep. I used the smaller wire bundle and hooked the two together and then had plenty of wire. Road master told me they were backed ordered and it would be 2 weeks to get it. Got it in 2 days on amazon. Roadmaster has a link that shows you a video on how to install it and the car wire codes..5Wiring Kit For TowablesThis was a very easy to use wiring kit that gave great instructions. Wiring cars for towing is a time consuming job but this kit makes it as easy as possible. Worked well.5Good kit for my f150This is the second time I've bought this kit. Bought a new truck so needed to wire it up. Both times installing went well. Good quality and instructions.5Did not come with diodes instead shipped with light bulbs ... Did not come with diodes instead shipped with light bulbs that you have to drill into tail lights to make work which wouldn't even fit! Returned! 1Wiring a BreezeThis product was easy to install, instructions simple to follow and works very well. Recommend this product to hook up lights to your dingy.5Good System that Simplifies the Light Hook-up on Tow VehicleVery good system that installed easily in my 2017 F150 making it much easier than adding extra lights to the back of the truck when towing. I also think this is a better system than adding the light socket that you must drill a hole into your back light housing. I have heard if not resealed correctly might cause fogging of the lens and moister issues in the housing.5
See All Reviews
Return And Refund Policy
  • Return or exchange requests can be made within 10 days of the delivery date.
  • To return or exchange any items, please email us at info@directnine.uk, clearly mentioning your order number and our customer support team will guide you on the process.
  • To be eligible for return, products must be in the exact condition you received them in. All packaging material must be undamaged and unused with the price tags intact.
  • Orders can be cancelled before dispatch. If the order has already been dispatched, cancellation fees might be charged.
  • Due to the nature of the products that we sell, we will not be able to replace or refund unwanted items if they have been opened or any seals are broken.
  • The refund will not include the import duties or the cost of delivery or return postage.
  • If your refund is approved, then it will automatically be credited to the original method of payment, within 7-10 days.
  • DirectNine reserves the right to alter and enforce this Return and Refund Policy at any time without having to serve a prior notice to users.
Delivery Policy
Shipment tracking ID will be provided after your product(s) is dispatched. The delivery date stated is indicative and subject to availability, payment authorization, verification, and processing. In case your product(s) is not delivered due to an incorrect or invalid address, we will not be able to process any claims. However, we will notify you if it is returned to us.

Recently Viewed

BACK TO TOP