• Astatic 302-AST878DM Cb Desk Mic
Astatic 302-AST878DM Cb Desk Mic

Astatic 302-AST878DM Cb Desk Mic

SKU:HA3O44LI6
Sale price
SG$ 189.00
Regular price
SG$ 314.00
Unit price
per 
( 39% off )
Quantity:
Expected Delivery: 21-28 days

Tracked Shipping

Secure Payments

10 Days Return

Tracked Shipping

Secure Payments

10 Days Return

  • World Famous Desk Mic
  • Standard Push-to-Talk and Lock-to-Talk Buttons
  • High Quality Omni Directional Ceramic Cartridge
  • 5 Conductor Shielded Standard Astatic Color Coded Cable
  • 4-Pin Connector
  • World Famous Desk Mic
  • Standard Push-to-Talk and Lock-to-Talk Buttons
  • High Quality Omni Directional Ceramic Cartridge
  • Requires a Standard 9-Volt Battery (Not Included)
  • Rugged Cycolac Resin Housing
  • 5 Conductor Shielded Standard Astatic Color Coded Cable
  • 4-Pin Connector
  • For Industrial and Commercial Applications

Customer Reviews

Works good now. Had to open it up after a couple days and spray some lube on the switch. Mic was so crackly, people on the other end couldn't understand me. Works good now. 3ABSOLUTE JUNK!This is the crappiest desk mic I've owned in the last 32 years on the CB. Whoever designed the audio circuit has a tin ear. It is probably best suited for Chinese CB'ers since it doesn't understand English. The mic's frequency response leaves tons to be desired of. It has NO PROXIMITY EFFECT. There are absolutely NO LOWS, only midrange and treble. Adjusting the volume pot is a real pain no matter where you set it or the mic gain on your radio. With a brand new 9 volt Duracell (and I tried several) you just about have to eat the mic in order to get a half way decent sound out of it. More than two inches away from it and the audio drops like a rock! As if you were holding the key down with a ten foot pole from another room, THAT BAD! You either have to hold this mic like a handheld one close to your mouth or hunch over close enough to talk into it. Don't even get me started on the battery compartment. It was designed by a moron. If a crappy sounding mic is what you're looking for this is the one you want. ABSOLUTE JUNK!1OK. EA. 5Scratchy sounding nowDeveloped a scratch, tinny transmit sound. Save your money, Modulation screw on bottom is pretty cheap. Considering I have two road devils that are have the price and twice as good,poor job Astatic.2The first one is still working great at my girlfriend's house after about 10 yrs of ... This is my 2nd 878dm. The first one is still working great at my girlfriend's house after about 10 yrs of use. My new one is here at my place. Always get great audio reports on this mic. 5I have had several desk microphones over the years and ... I have had several desk microphones over the years and this one simply shines. 5Nice enough feel to itNice enough feel to it, although not like the solid metal one's. I did find that i had to talk fairly close to the mike to get decent enough modulation. Some contacts i've made said it was a little on the tinny side, but others have said it sounded good, so your guess is as good as mine there...3I Love this when it worksI Love this when it works...the first one I got would not work at all. This one worked fine until a few weeks ago and goes in and out. So I am having to replace it with a hand held microphone again and I hate that. Really wish it worked better (or longer) I've only had it 2 1/2 months3Desk MicrophoneArrived on time, well packed, and in perfect condition. Did a good job for me, had good station modulation reports from other operators. Remember though, you will likely have to wire this Mic to match your individual radio. I even had to solder in a capacitor. Good Luck.4Cheap Junk . . .Just another cheap piece of junk disguised with a pretty face.DO NOT BUY . . . 9 volt Battery holder under the base broke the clip.Battery fell out and broke the wire.You've been warned.1GoodGood4Guh Rate MikeSound loud and proud with this now! Before I was barely heard and people made fun of the size of member.5I like the mic it works very well arrived on-time packaged ...I like the mic it works very well arrived on-time packaged well works very good on both of my radios I have a magnum S3 I use it on and a Stryker Sr 955 I use it on5Did not work out of the boxI am an old CB,r from the 80"s. Have been a Ham operator for a good while now. The mike did not work out of the box. I took the plug apart and checked the wiring, No problem there. I took the base off and the circuit board looking for any cold solder or maybe loose wires. Put everything back together and it worked fine. Now, how long ? who knows.2
See All Reviews
Shipment tracking ID will be provided after your product(s) is dispatched. The delivery date stated is indicative and subject to availability, payment authorization, verification, and processing. In case your product(s) is not delivered due to an incorrect or invalid address, we will not be able to process any claims. However, we will notify you if it is returned to us.
  • Return or exchange requests can be made within 10 days of the delivery date.
  • To return or exchange any items, please email us at info@directnine.sg, clearly mentioning your order number and our customer support team will guide you on the process.
  • To be eligible for return, products must be in the exact condition you received them in. All packaging material must be undamaged and unused with the price tags intact.
  • Orders can be cancelled before dispatch. If the order has already been dispatched, cancellation fees might be charged.
  • Due to the nature of the products that we sell, we will not be able to replace or refund unwanted items if they have been opened or any seals are broken.
  • The refund will not include the import duties or the cost of delivery or return postage.
  • If your refund is approved, then it will automatically be credited to the original method of payment, within 7-10 days.
  • DirectNine reserves the right to alter and enforce this Return and Refund Policy at any time without having to serve a prior notice to users.
Description
  • World Famous Desk Mic
  • Standard Push-to-Talk and Lock-to-Talk Buttons
  • High Quality Omni Directional Ceramic Cartridge
  • 5 Conductor Shielded Standard Astatic Color Coded Cable
  • 4-Pin Connector
  • World Famous Desk Mic
  • Standard Push-to-Talk and Lock-to-Talk Buttons
  • High Quality Omni Directional Ceramic Cartridge
  • Requires a Standard 9-Volt Battery (Not Included)
  • Rugged Cycolac Resin Housing
  • 5 Conductor Shielded Standard Astatic Color Coded Cable
  • 4-Pin Connector
  • For Industrial and Commercial Applications
Reviews

Customer Reviews

Works good now. Had to open it up after a couple days and spray some lube on the switch. Mic was so crackly, people on the other end couldn't understand me. Works good now. 3ABSOLUTE JUNK!This is the crappiest desk mic I've owned in the last 32 years on the CB. Whoever designed the audio circuit has a tin ear. It is probably best suited for Chinese CB'ers since it doesn't understand English. The mic's frequency response leaves tons to be desired of. It has NO PROXIMITY EFFECT. There are absolutely NO LOWS, only midrange and treble. Adjusting the volume pot is a real pain no matter where you set it or the mic gain on your radio. With a brand new 9 volt Duracell (and I tried several) you just about have to eat the mic in order to get a half way decent sound out of it. More than two inches away from it and the audio drops like a rock! As if you were holding the key down with a ten foot pole from another room, THAT BAD! You either have to hold this mic like a handheld one close to your mouth or hunch over close enough to talk into it. Don't even get me started on the battery compartment. It was designed by a moron. If a crappy sounding mic is what you're looking for this is the one you want. ABSOLUTE JUNK!1OK. EA. 5Scratchy sounding nowDeveloped a scratch, tinny transmit sound. Save your money, Modulation screw on bottom is pretty cheap. Considering I have two road devils that are have the price and twice as good,poor job Astatic.2The first one is still working great at my girlfriend's house after about 10 yrs of ... This is my 2nd 878dm. The first one is still working great at my girlfriend's house after about 10 yrs of use. My new one is here at my place. Always get great audio reports on this mic. 5I have had several desk microphones over the years and ... I have had several desk microphones over the years and this one simply shines. 5Nice enough feel to itNice enough feel to it, although not like the solid metal one's. I did find that i had to talk fairly close to the mike to get decent enough modulation. Some contacts i've made said it was a little on the tinny side, but others have said it sounded good, so your guess is as good as mine there...3I Love this when it worksI Love this when it works...the first one I got would not work at all. This one worked fine until a few weeks ago and goes in and out. So I am having to replace it with a hand held microphone again and I hate that. Really wish it worked better (or longer) I've only had it 2 1/2 months3Desk MicrophoneArrived on time, well packed, and in perfect condition. Did a good job for me, had good station modulation reports from other operators. Remember though, you will likely have to wire this Mic to match your individual radio. I even had to solder in a capacitor. Good Luck.4Cheap Junk . . .Just another cheap piece of junk disguised with a pretty face.DO NOT BUY . . . 9 volt Battery holder under the base broke the clip.Battery fell out and broke the wire.You've been warned.1GoodGood4Guh Rate MikeSound loud and proud with this now! Before I was barely heard and people made fun of the size of member.5I like the mic it works very well arrived on-time packaged ...I like the mic it works very well arrived on-time packaged well works very good on both of my radios I have a magnum S3 I use it on and a Stryker Sr 955 I use it on5Did not work out of the boxI am an old CB,r from the 80"s. Have been a Ham operator for a good while now. The mike did not work out of the box. I took the plug apart and checked the wiring, No problem there. I took the base off and the circuit board looking for any cold solder or maybe loose wires. Put everything back together and it worked fine. Now, how long ? who knows.2
See All Reviews
Return And Refund Policy
  • Return or exchange requests can be made within 10 days of the delivery date.
  • To return or exchange any items, please email us at info@directnine.uk, clearly mentioning your order number and our customer support team will guide you on the process.
  • To be eligible for return, products must be in the exact condition you received them in. All packaging material must be undamaged and unused with the price tags intact.
  • Orders can be cancelled before dispatch. If the order has already been dispatched, cancellation fees might be charged.
  • Due to the nature of the products that we sell, we will not be able to replace or refund unwanted items if they have been opened or any seals are broken.
  • The refund will not include the import duties or the cost of delivery or return postage.
  • If your refund is approved, then it will automatically be credited to the original method of payment, within 7-10 days.
  • DirectNine reserves the right to alter and enforce this Return and Refund Policy at any time without having to serve a prior notice to users.
Delivery Policy
Shipment tracking ID will be provided after your product(s) is dispatched. The delivery date stated is indicative and subject to availability, payment authorization, verification, and processing. In case your product(s) is not delivered due to an incorrect or invalid address, we will not be able to process any claims. However, we will notify you if it is returned to us.

Recently Viewed

BACK TO TOP